Store Front  »  Live Roller Conveyor

Model 190-NSP Live Roller Conveyor

FLOOR SUPPORTS Help
MS Type floor supports are available with a wide range of adjustment. Specify top of belt or roller elevation. One support required at every bed joint and ends of conveyor. Holes in feet for lagging to floor. Knee braces recommended above MS-6 support.
CONVEYING SPEED Help
Other constant and variable speeds from 30 to 120 FPM. Over 120 FPM timing belt drive recommended. Capacity affected with speed change.
CROSSOVER Help
Separate section relocates drive shaft from one side of conveyor to the other. Minimum Elevation-12-3/8 in.
GUARD RAILS Help
Continuous adjustable channel, fixed channel or type A & B angle. NOTE: If product comes in contact with guard rails, product flow will be affected. Fixed channel overlapping, one direction. Fixed channel non-overlapping, reversing.
POLY-TIER SUPPORTS Help
36 in. to 120 in. support heights in 6 in. increments. Knee braces supplied.
CEILING HANGERS Help
5/8 in. dia. x 8 ft. long unplated rods fully threaded. Other lengths and galvanized rods available.
MOTORS Help
Energy efficient, single phase, other characteristics. 2 HP maximum.
ELECTRICAL CONTROLS Help
Non-reversing or reversible magnetic starters and push-button stations. AC variable frequency drive.