Model 190-ACC Horizontal Power Conveyor (Accumulating Type)
MS Type floor supports are available with a wide range of adjustment. Specify top of belt or roller elevation. One support required at every bed joint and ends of conveyor. Holes in feet for lagging to floor. Knee braces recommended above MS-6 support.
Other constant speeds from 25 to 120 FPM. V-belt drive supplied under 56 FPM (with 1-1/2 HP). NOTE: Capacity and accumulation feature affected with speed change.
Fixed ends stops, blade, roller or pin type stops available.
Continuous adjustable channel, fixed channel, type A & B angle. NOTE: If product comes in contact with guard rails, product flow will be affected. Fixed channel overlapping, one direction. Fixed channel non-overlapping,
36 in. to 120 in. support heights in 6 in. increments. Knee braces supplied.
5/8 in. dia. x 8 ft. long unplated rods fully threaded. Other lengths and galvanized rods available.
Energy efficient, single phase, other characteristics. 1 HP maximum.
Many common electrical controls are available. These items include: One direction manual start switch, reverse drum switch, non-reversing and reversible magnetic starters, push button stations, AC variable frequency drives. Look for these components in the ELECTRICAL Category.